Quality Testing

Quality is delighting customers

Hi... Can anyone please let me know how would i become a good tester in manual testing??
Should i join any institute or refer any particular book??

Thank You

Views: 137

Reply to This

Replies to This Discussion

initially u should join some institute n practice the testcases
oh ok thanks
Hi Sharanu,

I strongly recommend you to learn Manual Testing by your self, it's no Rocket Science to learn from Institute or University!!! more over Self learning is the best learning.

Unfortunately most of the institutes teach CRAP testing, which will be quite different when you get into work.

1) Assess yourself where you stand in terms of pre-requisites as a Tester
2) Start reading any standard book on Testing
3) Participate in discussions or forums
4) Practice the same if you are working or else work on some standalone applications.

* More over if your struck some where there are enough good folks @ QT.

Thanks Siddiq!!
But how to start with coz m a fresher??

Hi, as a fresher ,you first try to get your fundas clear on the basics and the important thing is you should learn to create scenarios and write testcases for those.As a tester you should have a creative mind to write test cases and strong test to break attitude to find the defects.
so, to start ,take any small example like ,how will you test a pen ? or a login page and start thinking of all possible scenarios to write test cases ,once you will start practising all these things ,you will learn everything gradually.so ,all the best and keep posted in case of any doubt.
Hi Sharanu,

My post was w.r.t FRESHER not experienced person.

Start from 1), 2) to 4)


First learn about SDLC.. it will let u know the importance of testing.

Try to understand the Requirements in customer prospects. Understand about Expected and actual Results.
Verify all the software Application (WEB / DT)standards.

First start writing the Test Scenarios and then go to Test Steps... Hope it helps for your career.
Hi Sharanu,

Take it easy ..i hope you will find this very easy.

Many people approached me for help with likes of the following questions:

-- I am new to Testing field and I do not know anything about it, will I be able to secure a good future and survive in this field?

-- I hear about terminologies but cannot relate them logically, what can help me in getting well versed with all the relevant terminologies of testing field?

-- I am asked to test an application, but I don’t know requirements how do I go about it?

-- What should I do to become a good and a complete tester?

-- Is it necessary for me to learn software testing automation tools?

I will try to address each and every question (and also all the other similar type of questions asked by my readers over the period of time) with the help of following scenarios and hope that it will help my readers.

I am totally new to this field, where and what should I begin with?
This seemingly stupid question is actually a very valid query, as many of the testers are from the non-computer background. It indeed can be very hard for any new person to understand the terminologies if that person is entering the IT field for the very first time.

My advice to the new testers with non-computer background would be to read something about computers and relevant terminologies. Reading computer science basics can help them. They should try to understand various terms used in Software Engineering and programming domain. (Please note that the Computer Science and Software Engineering field is very vast, you just have to go through the basics and not the entire course).

Once you start understanding, what is a program? What does it mean by execution? What are the different languages? Etc. you gain enough momentum and understanding which helps you in dealing with any new terminology in the computer world. As you finish it, you should also take an overview of various development methodologies used in the software development field such as Water-Fall model, spiral model, incremental-integration model etc.

After you finish your first step, you should start looking into various terminologies and definitions used in software testing field such as various types of testing, testing strategies, methodologies etc. Even though most of the definitions/terminologies are very simple and quite easy to understand, you should try to create a small definition directory, which will be handy for you anytime you wish to go through.

As soon as you are done with the above specified things, you should understand what is a bug/error and life-cycle of a bug (For this you can go through my articles "Software Testing – An Introduction", "Software Testing – Contents of a Bug", "Software Testing – Bug Life Cycles" and "Software Testing – Bug And Statuses Used During A Bug Life Cycle"). At this point, you will have enough knowledge to be able to take a plunge in the vast field of Software Testing.

How should I test a system without knowing requirements?
Recently many people asked me the same question … and truly speaking my answer to this question is "YOU SHOULD NOT TAKE A CHANCE TO TEST SYSTEM WITHOUT KNOWING REQUIREMENTS".

If you are testing a system without knowing the requirements, its just like searching for something in this world and you don’t know what you are exactly expected to look for and identify. This way whatever you come across, you will think that it’s the same thing that you have been searching entire world for. And we have to admit that it surely can be your mistake. If someone has asked you to test a system without giving you the proper requirements, then almost everything you see in the system will seem to be a bug for an example if the requirement says that there should be a submit button on the login form but as the requirement has not been specified, you surely will say that the submit button is a mistake of developer and it should not be there (even when logically we know there WILL be a submit button on the login form) and hence you will count it as a bug.

So please, do not think of testing a system without getting proper requirements. And if someone makes you test the system without specifying you the actual requirements, then you should start yelling at each and everything that happens in the system saying it is a bug … the reason is simple … you don’t know what should be there in the system and what should not!

On other hand, if you really want to test a system and no matter what are the requirements, then you surely can go ahead and do so. But then you will have to use only monkey testing. The reason for this is again the same … you don’t know anything about the system! So whatever you LOGICALLY think can be a potential bug in the system, you can report it.

What should I do to become a good and complete tester?
You should try to expand the horizon of your knowledge, your understanding of any subject, depth of thinking and be creative. Try to learn new trick which will help you stand in the crowd. Develop your own understanding and techniques of how you should test the system so that you can find more and more bugs, giving the best result.

Anyone can test a system, even if a normal person brings a Television at his house he can find out a normal defect that like defective power cable by trying to turn the Television On, and mark my words … EVERYONE WILL DO THE SAME THING AT FIRST. Then what’s the difference in that normal person and you as a tester (or say GOOD Tester)? Here you can distinguish yourself from others; you can try to search for more bugs in the system.

Is it necessary for a Tester to learn Automation Tools?
Software testing in India is growing very fast. And I can assure you that there will be deep penetration of automation tools and their uses. So the more you know about automation tools the better chances you stand to mark your presence in the industry over others.

It also depends on the type of project you are working in, if your work demands you to understand and use an automation tool then in that case you will have to surely learn it.

Belive me Testing Institute are junk..they won't teach the system is not there infront of them.

It is somthin like "Every mother shows to a baby -- "a moon in the sky" when they cry at nights.

Good luck and welcome on board at anytime.



TTWT Magazine





© 2021   Created by Quality Testing.   Powered by

Badges  |  Report an Issue  |  Terms of Service