QTP 10 cannot identify IE8

Replies to This Discussion

Permalink Reply by Naresh on July 18, 2012 at 2:28pm

if it installed properly then check the recording settings once and one more solution prepare the script in Descriptive and execute once that script then u r able create the Obj repository scripts also.

if that installation is having prob then Run patch for QTP-windows7 thn it wil work..

• ▶ Reply

Permalink Reply by Prashant Shrivastaav on July 18, 2012 at 2:34pm

Hi,
I am working last 4 month on IE8 with QTP(10.0) it’s working properly.
Thanks
Prashant

• ▶ Reply

Permalink Reply by Paladi Anish on July 18, 2012 at 3:26pm

Hi Rajasekhar,

if you are launchign ie through systemutil.run just change the code as below.

systemutil.run "C:\Program files (x86) \Internet explorer\explorer.exe",www.google.com"

othere wise you should be disable user acceptance control in control panel,

as also check the qtp installed propertly or not and also record settings.

 

let me know if you are still facing the issue.

 

• ▶ Reply

Permalink Reply by rajashekarreddy on July 18, 2012 at 4:10pm

Hi Anish,

I was installed qtp in a correct way and also i tried through systemutil.but still qtp is notable to identify IE8.

• ▶ Reply

Permalink Reply by Subbu on July 18, 2012 at 4:03pm

You can try this:

In Automation Menu, select Record and Run settings option.

You will get a dialog box where select Web Tab and select Record & Run on any open browser option.

Note: You should select Web Addin in Addin Manager.

• ▶ Reply

Permalink Reply by rajashekarreddy on July 18, 2012 at 4:15pm

Hi Subbu,

I tried but still not resolved.

• ▶ Reply

Permalink Reply by Naresh on July 18, 2012 at 4:17pm

do u have any Existed Script then simply execute that one ur problem wil solve..

• ▶ Reply

Permalink Reply by ^ siva kumar @ on July 18, 2012 at 4:39pm

install qtp patches for windows 7 support

• ▶ Reply

Permalink Reply by Subbu on July 18, 2012 at 4:44pm

I added you as my friend, come to chat i can help you

By the way:

You should open QTP first then IE later.  try this.

• ▶ Reply

Permalink Reply by Pradeep Kumar Jakhar on July 18, 2012 at 9:10pm

Hi Raja...

Do the following steps:

1.Go to internet options.

2.Select security tab.

3.Now uncheck the 'Enable Protected Mode' check box.

4. Now Close the browser and restart it.

I hope it will help you.

• ▶ Reply

Permalink Reply by rajashekarreddy on July 18, 2012 at 9:27pm

Hi pradeep,

Thanks a lot it is working now.

• ▶ Reply

Permalink Reply by Atulya Krishna Mishra on July 23, 2012 at 6:23pm

Hi Rajshekhar,

It was a common problem with QTP 10.0 you can apply QTP 10.0 Patch provided by HP for its support to IE-8.

Even I faced the same problem but after applying the patch its working fine for Win-7 (32 bit).

Rgrds.

Atulya Krishna
Times Group

• ▶ Reply